Uma comparação entre o Office com compra única e o Microsoft 365: funções, suporte, dispositivos, ativação e...
DESCONTO -20% - use o código 1WEEKválido sem pedido mínimo
Turning on the computer and being faced with a black screen, a frozen screen, or an endless loading can be frustrating. When The PC turns on but Windows 10 doesn't start up. The problem can depend on various causes, not always serious, but often difficult to interpret for those without technical skills.
In this guide, we analyze why won't Windows 10 start , what to check first and which solutions to try, starting from the simplest ones to the most advanced interventions, without unnecessary technicalities.
If the PC turns on properly - the fans spin, the LEDs are lit and maybe you can also hear the noise of the hard drive - but Windows 10 won't start up , it means that the basic hardware is receiving power, but something is blocking the operating system from loading.
This scenario is different from a fully turned off computer: in fact, in most cases, the problem is software or related to the Windows startup process, although hardware failures cannot be ruled out.
When Windows 10 does not start, the most common causes are:
Windows updates not successfully completed
damaged system files
errors in the bootloader
incompatible or corrupted drivers
sudden shutdowns or blackouts
Hard drive or SSD issues
Faulty or improperly connected RAM
Understanding the exact cause is not always immediate, but observing what appears on the screen greatly helps to orient oneself.
One of the most common cases is The PC turned on with a black screen . Before thinking about a Windows problem, it is important to distinguish between two situations:
The screen is completely black and nothing appears.
The Windows logo appears, but the loading gets stuck.
In the first case, the problem could be related to the video connection, the monitor, or the graphics card. In the second case, however, it is much more likely that Windows 10 cannot start up correctly .
Try to connect the PC to another monitor or to another video port, if possible. If the problem persists, then it is the operating system that is not starting.
Before moving on to more advanced solutions, there are some simple but fundamental checks:
Disconnect all external peripherals, such as USB sticks, external hard drives, printers, and webcams. Sometimes Windows crashes trying to boot from an external device.
Restart the PC several times in a row. After two or three failed attempts, Windows should automatically start the recovery environment.
If you use a laptop, try starting it with only the power adapter connected, without the battery (if removable).
If the system doesn't start, Windows 10 provides a tool called Recovery Environment (WinRE) .
It usually activates automatically after several failed starts, but it can also be forced by turning off the PC during the loading process two or three times in a row.
From here you can access various useful options to solve the problem.
The first solution to try is the startup repair .
Windows will attempt to automatically identify and correct any errors that prevent the system from loading.
This operation does not involve data loss and is often enough to solve problems caused by updates or corrupted system files.
If the automatic repair doesn't work, you can try to start the PC in safe mode .
In this mode, Windows only loads the essential components, excluding unnecessary drivers and software.
If the PC starts correctly in safe mode, the problem could be caused by:
a recent driver
a recently installed program
an incompatible update
In these cases, uninstalling the problematic element can permanently solve the problem.
Another effective solution is the system restore .
Windows allows you to revert to a previous configuration, when the computer was working correctly, without deleting personal files.
It is particularly useful if the problem appeared after a recent update or change to the system.
If none of the software solutions work, it is possible that the problem is hardware. The most often involved components are:
damaged hard disk or SSD
Faulty RAM
disconnected internal cables
A typical sign of disk problems is very slow loading, abnormal noises, or error messages related to booting. In these cases, it is advisable to carry out a thorough check or consult a technician.
If Windows 10 still fails to start and the other options have not worked, it may be necessary. reinstall the operating system .
Windows also offers the possibility of running a reset while keeping personal files , an intermediate solution that often solves the problem without losing important documents and data.
If instead the system is seriously compromised, a complete reinstallation ensures a clean and stable restoration.
To reduce the risk that the PC turns on but Windows does not start again, it is advisable:
keep Windows always updated
avoid sudden shutdowns
Use an uninterruptible power supply in case of frequent blackouts.
Update drivers and software only from reliable sources.
perform regular backups of data
When The PC turns on but Windows 10 does not start up. The problem may seem severe, but it is often solvable with a few targeted steps. Acting calmly, following a logical procedure, is the best way to avoid unnecessary interventions or data loss.
If you need to reinstall the operating system or replace a non-functioning license, on Macrosoft Store You find all the versions of Microsoft Windows available , from Windows 10 to Windows 11, in a single dedicated section.
Deixe um comentário